ACU-RITE 200S READOUTS Manual de usuario descargar pdf (Pagina 63)

200S 49

I - 4 Turning Specific Operations

8 Press the DOWN arrow key to advance to the Z axis.

8 Touch the workpiece surface at point 2.

8 Enter the position of the tool tip (Z= 0) for the Z coordinate of

the datum.

8 Press ENTER.

Setting Datums using LOCK AXIS Function

The LOCK AXIS function is useful for setting a datum when a tool is

under load and the diameter of the workpiece is not known.

To use the LOCK AXIS function:

8 Press the DATUM soft key. The cursor will be in the DATUM

NUMBER field.

8 Enter the datum number and press the DOWN arrow key to go to

the X axis field.

8 Turn a diameter in the X axis.

8 Press the LOCK AXIS soft key while the tool is still cutting.

8 Retract from the current position.

8 Turn the spindle off and measure the workpiece diameter.

8 Enter the measured diameter, for example, 1.5” and press ENTER.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 97 98

Sin comentarios

ACU-RITE 200S READOUTS Manual de usuario Pagina 63