ACU-RITE 200S READOUTS Manual de usuario descargar pdf (Pagina 42)

28 I

I - 3 Milling Specific Operations

Example: Set centerline between two workpiece edges as datum

0 is offered as a default value for the coordinate. Enter the desired

coordinate for the workpiece edge. For this example Y = 0.0, set the

coordinate as a datum for this workpiece.

8 Press the ENTER hard key.

The position of the centerline M is determined by probing the edges

1, and 2.

The centerline is parallel to the Y axis.

Desired coordinate of the centerline: X = 0.0

Spacing between edges is displayed on the message box

when using the probe centerline feature.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 97 98

Sin comentarios

ACU-RITE 200S READOUTS Manual de usuario Pagina 42