ACU-RITE 200S READOUTS Manual de usuario descargar pdf (Pagina 49)

200S 35

I - 3 Milling Specific Operations

To preset the location for Hole 2:

8 Press the PRESET soft key.

8 Press the X axis key.

8 Enter nominal position value for hole 2: X = 1.5”, mark your input as

an incremental dimension, press the I soft key.

8 Press the Y axis key.

8 Enter nominal position value for hole 2: Y = 1.5”, mark your input as

an incremental dimension, press the I soft key.

8 Press ENTER.

8 Traverse the X and Y axes until the display value is zero. The square

in the near zero warning is now centered between the two

triangular marks.

8 To preset the Z axis:

8 Press the PRESET soft key.

8 Press the Z axis key.

8 Press the ENTER key (use last entered preset).

8 Drill hole 2: Traverse Z axis until the display value is zero. The square

in the near zero warning is now centered between the two

triangular marks.

8 Retract the drill.

1/2 Soft Key

The 1/2 hard key is used to find the centerline (or midpoint) between

two locations along a selected axis of a workpiece. This can be

performed in either Actual Value or Distance-To-Go mode.

This feature will change datum locations when in Actual

Value mode.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 97 98

Sin comentarios

ACU-RITE 200S READOUTS Manual de usuario Pagina 49