Acu-rite 100S Manual de usuario descargar pdf (Pagina 12)

100S General Purpose Reference Manual 9

Setup

Scale Resolution

To ensure accurate readings, the scale resolution shown for each axis

must correspond with the resolution of the scales on your machine.

To change the scale resolution:

• If necessary, choose “Scale Resolution” from the Setup menu.

(Press SETUP and then the ENTER key until the screen appears).

• Press the appropriate axis key (X, Y or Z) until the appropriate resolu-

tion appears. Choose 0.01 mm for 10µm (0.0005”) scales, 0.005 mm

for 5µm (0.0002”) and 0.001 mm for 1µm (0.00005”)scales.

• Repeat the procedure for each axis.

• Press ENTER to continue with Setup.

Count Direction

Use the count direction setting to define the positive counting direction

for each scale. The direction will be displayed as a “1” or a “2” (the num-

bers are not assigned to a particular direction). You only need to change

the count direction if the scale is counting in the negative

direction during a positive move, or vice versa.

Refer to Conventions on pg. 29 for more guidelines.

To change the count direction:

• Move to the “Count Direction” display in the Setup mode. (Press

SETUP and then the ENTER key until “Ct dir” appears).

• Press the appropriate axis key (X, Y or Z). The current count direction

(1 or 2) will appear.

• After you complete setting your count direction, press ENTER to

continue with setup or press ENTER then SETUP to return to the

normal DRO display.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

Sin comentarios

Acu-rite 100S Manual de usuario Pagina 12