Acu-rite 100S Manual de usuario descargar pdf (Pagina 7)

100S Turning Reference Manual

SETUP

There are five to six parameters that you can define on your system:

• Display resolution (diS)

• Linear error compensation (LEC)

• Scale resolution (rES)

• Scale count directions (Ct dir)

• Input 3 ON/OFF (InPUt 3) 2+ units only

• Position Recall (recall)

Establish each setting the first time you power up the system. You can

change the parameters later by returning to Setup and then using the

ENTER key to scroll to the appropriate category.

Anytime you change the linear error compensation, or count direction

for an axis, the absolute and incremental displays for that axis will be

reset to 0. If you change these settings, you’ll need to reestablish the

datum point.

When in the Setup mode, use the CLEAR key when you want to back-

space, restore the previous value or access the previous parameter.

Parameter Setup

1 2 3 4 5 6 7 8 9 10 11 12 ... 36 37

Sin comentarios

Acu-rite 100S Manual de usuario Pagina 7