Acu-rite VUE Manual de usuario descargar pdf (Pagina 45)

II – 1 Installation Setup

Z Coupling (turning applications only)

The VUE Turning application provides a quick method for coupling the

Z0, and Z axis position on a 3 axis system. The display can be coupled

in either the Z, or Z0 displays.

Enabling Z Coupling

U To couple the Z0, and Z axis, and have the result displayed on the Z0

display, press and hold the Z0 key approximately 2 seconds. The

sum of the Z positions will be displayed on the Z0 display, and the Z

display will be blanked.

U To couple the Z0, and Z axis, and have the result displayed on the Z

display, press and hold the Z key for approximately 2 seconds. The

sum of the Z positions will be displayed on the Z display, and the Z0

display will be blanked. The coupling is preserved in between power

cycles.

Disabling Z Coupling

U To disable Z Coupling, press the axis key of the display that is blank.

The individual Z0, and Z display positions will be restored.

Moving either Z0, or Z inputs will update the coupled Z

position.

When a position is coupled, the reference mark for both

encoders must be found in order to recall the previous

datum.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 57 58

Sin comentarios

Acu-rite VUE Manual de usuario Pagina 45